EverSpring Flood sensor


EverSpring Flood sensor STB812

EverSpring Flood Sensor can detect when there are leaks or flooding.  It sends signal to the your Z-Wave gateway/controller.  Depend on your setup, it could alert you through email or active devices such as pumps, valves etc.,


The Flood Detector is powered by 3 x AA 1.5V alkaline battery. When battery level
drops below unacceptable level, the Detector flashes red LED once every 30 seconds
and reports low battery status to the node ID. When this occurs, the batteries should
be replaced as soon as possible

Available on backorder


The Flood Detector is a Z-WaveTM enabled device and is fully compatible with any Z-WaveTM enabled network.  Z-WaveTM enabled devices displaying the Z-WaveTM logo can also be used with it regardless of the manufacturer, and it can also be used in other manufacturer’s Z-WaveTM enabled networks.

Inclusion of this Flood Detector on other manufacturer’s Wireless Controller menu allows remote turn-on of connected modules and their connected lighting when the Detector is triggered. Z-WaveTM nodes in the system also act as repeaters if they support that function.


  • 3 x 1.5V AA type battery operation
  • Unit and Wired can be up to 3 m apart
  • LED for indication and battery status
  • Built-in 60dB beep tone reminding sound